Announcements

10 Year Anniverary & New Releases Winners: Carrie Fancett Pagels' Butterfly Cottage - Melanie B, Dogwood Plantation - Patty H R, Janet Grunst's winner is Connie S., Denise Weimer's Winner is Kay M., Naomi Musch's winner is Chappy Debbie, Angela Couch - Kathleen Maher, Pegg Thomas Beverly D. M. & Gracie Y., Christy Distler - Kailey B., Shannon McNear - Marilyn R.
Showing posts with label clothing. Show all posts
Showing posts with label clothing. Show all posts

Monday, August 8, 2016

Georgian vs. Regency? A Novelist's Primer

King George III of England (Wiki)
Nothing yanks a historically discerning reader out of a story faster than to find inaccuracies about small things they're familiar with. The goofs are easier to forgive when it's an author you love, or when you know that author is writing outside her usual time period, but it still can make for a painful read.

Or when you know some simple research would have remedied the situation.

A recent read brought home to me some very significant differences between what we think of as the Georgian era and the Regency era, differences that are very easily overlooked if you spend more "time" in one era than the other. According to Wikipedia:

The Georgian era of British history is a period which takes its name from, and is normally defined as spanning the reigns of the first four Hanoverian kings of Great Britain who were all named George: George I, George II, George III and George IV. The era covers the period from 1714 to 1830, with the sub-period of the Regency defined by the Regency of George IV as Prince of Wales during the illness of his father George III.
Technically, then, because the Regency era lay within the Georgian, I should say the differences I'm seeing are between the early and the late Georgian.

The first and most basic differences were those of clothing. The fashionable silhouette for a woman went from a tightly-bound, conical torso with the artificially wide or padded hips and bum to a more natural, flowing look reminiscent of the Greeks and Romans. Most of the changes happened between 1785-90, so if you're most familiar with Regency wear but you're writing before that time, here are a few things to remember about women's clothing:
  • Foundational wear was referred to as shift and stays, not chemise and corset. Until just after the American Revolution, stays were highly supportive and kept a woman's torso in a roughly conical shape, pushing a woman's bosom upward and not emphasizing curves as we know them. It was considered accepted during dress occasions for a woman's upper bosom to remain exposed. Only later did stays/corsets take on the hourglass shape most people are familiar with.
  • "Dress" referred either to one's clothing in general, or to the act of getting dressed. It did not, to my knowledge, refer to an actual woman's garment until later. During the Colonial era, a woman's garment was a "gown."
  • Bodices pinned down the front, for the most part. They did NOT lace up the back. Fit was less of an issue then, if, say, a woman needed to borrow her best friend's gown.
  • Sleeves covered to just past the elbow, because, well, a woman of repute just did not show their elbows. (One can see how the later styles of small, puffy sleeves could be considered shocking.)
Men's clothing had a few things to remember as well:
  • A man's shirt had extra-long tails that tucked forward and back, doubling as underwear. So the popular "period" trope of men walking around shirtless, in just their breeches, did not happen. 
  • Men were considered "naked" in just a shirt, or a shirt and breeches, or for that matter anything not covering the torso properly with a waistcoat and neck stock.
  • Overall, menswear suffered fewer changes than womenswear between the early and late Georgian era. One notable difference was hairstyles, the shift from locks long enough to curl, powder, and pull back in a queue, to a shorter, distinctively "windblown" style. The stylish RevWar era gentleman on either side of the pond would not be running his hand through his curls. :)
Oh, and nobody wore "bloomers" until sometime in the 19th century.

Miscellaneous:
Almack's in London ... obviously Regency era clothing :) (Wiki)
  • The "Season" in London. I've been trying to find a firm date on when this became a "thing" and the nearest I can tell is that it began to evolve sometime in the 17th century, but possibly not firmly entrenched into the grain of society until the advent of Almack's (a social club unique to its time in that it admitted both men and women) around 1765, or its rebuilding around 1800. What I have been able to find points to a shift from a debutante's being presented at court to securing vouchers from Almack's as a marker of one's social standing. So the whole "coming out" in London even during the time of the American Revolution may still hold water.
  • Dances:  Couples did not waltz until late 1700's, early 1800's. Former CQ contributor Dina Sleiman writes of the waltz, "It gained popularity on the European continent by around 1780, but was still scorned in respectable circles in England and the United States. It wasn’t until the Prince Regent introduced the waltz at a ball in 1816 that it was accepted in England."
 So these are just a few items, mostly off the top of my head, that I noticed while reading an otherwise very enjoyable author. No, I'm not going to say who. :) Maybe she was just under a serious deadline and didn't have time to stop for research?





Friday, June 24, 2016

Fulling Mills

Fulling Mill
In the beginning of the American Colonies, all cloth was imported from England. England already had a thriving textile industry by the mid-1600s. Some estimates are that 65% of the English economy was derived from its textiles. 

Although the importation of sheep was prohibited - to protect England's textile monopoly - resourceful colonists smuggled them. The hard-working Puritans were producing their own cloth almost as soon as they arrived.

Spinning and weaving is only part of the process of making cloth. Another important step in the process is called "fulling." Cloth straight off the loom is loose and sloppy. The fulling process washed out all the dirt and lanolin, then beat the fabric with wooden mallets (powered by a water wheel) until it shrunk and tightened into a usable bolt of cloth.

Wooden Mallets inside the Fulling Mill
After the cloth was pounded, it was brushed with a teasel head. Teasels are a dried flower head with hook-tipped spines that when brushed across wool fabric, will raise the nap of the fabric. The nap was then cut off with long, narrow shears. Next, the cloth was stretched over a long frame to dry.
Before fulling mills, this process was done by hand, or rather by feet. Stomping on the wet, soapy cloth took hours of labor to produce what the fulling mill could do in half the time with better results.

By the time King William III issued the Wool Act in 1699, our colonial ancestors were already providing cloth for themselves and were exporting the excess to other colonies and ports.



PeggThomas.com

Wednesday, November 19, 2014

Constructing a Red Cape

Reenactors at the Battle of the Hook - Two with Red Capes

I have a story where a red cape is one of the plot details. I've been on the lookout for construction of capes. So when Cynthia Howerter and I came across these lovely ladies at the Battle of the Hook reenactment last year, we had to stop to chat with them!

Below is the inside of the longer red cape. As you can see, it requires a great deal of material. I was told that the cloth, a bright red wool, is often available through reenactor sales suppliers.  You'll see in the pictures that follow, that the hood can be lined with white fabric.
















Here it is fully pulled open. You can see the panel on the right, that I'll also show below.  So below we can see she is pointing to the seam that was stitched to hold the extra panels on the ends.  Note, above, that the material is gathered at the neckline where it meets the hood.
















Below is the hood from the shorter cape. Note how the center of the hood becomes almost a cone shape when pushed through.

You can see from the picture below that the spacious cape comes in handy for keeping your daughter warm, too! Loved meeting these ladies.
 In the picture below, the excess lining is gently gathered and tucked inside between the wool and linen or cotton lining.

Here we can see how the fabric is not stitched together in this hood, but it can be, if you prefer. It is not required. This is a nice time saving if one is in a hurry to get ready for a reenactment event. Or if one is a busy mother with little time to attend to the detail for finely sticking down the gathered sections which is very time consuming.

I sure wish I had my own red cape. Alas, I still do not. And I don't think I'll be able to construct my own at this point in time. But this project does look very doable. The heavy wool does not really require a hem at the bottom. It can be cut with sharp sheers with little to no fraying.

Until I have my own red cape (which I'd love to have used with some willing young lady as model for the cover I have in mind) I'll have to content myself with looking at these pictures of these beautiful red capes!

Question: Is there some colonial garment that you wish you owned? 

Friday, November 15, 2013

Adventures in Historically Accurate Costuming, Part 3



Reed for boning, unbleached linen, twill tape ... ready!
So, as things turned out, I wound up in our hometown-to-be the first weekend of November and missed attending the RevWar event in Camden. Finishing out my 18th century ensemble has been put on hold for now, but I’ll talk about my experience with doing a fully boned pair of stays ...

I explained how the cardboard mockup gave me severe cramping across my lower back and hips. I’ve wondered, with my history of back issues (an injury at age 15 made chiropractic care a near necessity over the years), how much of wearing stays was the 18c way of dealing with chronic pain, since at that point they were as much about support as shape, especially among working classes. Infants and children wore specially made stays as well, because society during that era believed that developing bodies needed the support.

Inside of the stays...center is front
Determined to get a rudimentary pair of stays made, I ordered ash boning reed (essentially the same thing used for splining on caned chair seats) and a few other supplies. The wood boning is preferable to other materials because of its flexibility and breathability—using all plastic or metal poses the danger of overheating during summertime wear. For the fabric, I needed three layers: outside, interfacing, and lining. I cut the outer layer from a rough, unbleached linen, the interfacing from white linen left over from my shift, and the lining from the unbleached linen. (I should have switched the interfacing and lining.) I’d made a mockup of cheap muslin and tried it on, and found that it fit well enough I could pretty much just cut out the pieces according to the original pattern. So much for the cardboard mockup being accurate. :-)

Outside of stays
It was also recommended that I not assemble the stays as directed by the pattern (each layer as one), but by pattern piece, sewing the layers together on the boning channels before assembling them as a whole. Also, I made the stays front-lacing as well as back lacing, so I edged the front and back openings alike, following the directions for the back.

Lacing holes--I've hand stitched the edges of one, but not the others!
After sewing in channels and and assembling the two halves of the stays, I inserted one length of boning into each, and made holes down the front and back openings for the lacing (not cutting the fabric, but poking a fine knitting needle through, then a thicker one, and using a heavy embroidery needle to pull the twill tape through the holes for lacings). At that point, there wasn't time to finish out the stays before trying them out for my book launch party.

Pattern for pockets, and other goodies
The fit was amazing! Just enough support and shaping that I shouldn’t have to alter the dress much, if at all. And they are comfortable enough for several hours’ wear, without pain. (No photos of this part, sadly!) I did discover that I'll need to beef up the boning--two lengths per channel--for strength and rigidity. I'll also need to attach the lining before trimming the edges and attaching the binding, which I hear can be a job all its own, depending upon whether I use linen or soft leather. I'm told the soft chamois pieces sold at auto parts stores work great for this.

Pattern for cap
After the book launch party, I’d planned to continue construction on the ensemble—finishing the stays, adding a colonial ladies’ cap and possibly pockets—but all that came to a grinding halt in favor of preparations for my husband to travel to his new job and then my last-minute househunting trip out there. But I have plans to complete the ensemble, after our move.

Any questions on the process? Details you want to ask about? I’m happy to share or clarify!

Friday, October 18, 2013

Adventures in Historically Accurate Costuming, Part Two

So, picking up the saga from my first post on sewing an 18c outfit ...

I decided I needed a shift (the sleeves on my cotton medieval chemise were far too full to fit inside the very fitted ones of an 18c gown), basic stays (I planned to make a cardboard mockup as phase one of fitting for “real” ones, and I’d heard of at least one person wearing the mockup to an event, so that couldn’t be so bad, could it?), an under-petticoat made over from an old linen skirt, and a basic gown and matching petticoat. I’d purchased some linen, both white and natural, on sale a few months ago. I was working from plans I’d found online at a source recommended by those experienced in the hobby of period reenacting. This meant no pattern as such, just measurements taken on myself and then translated to lines, angles and curves on a folded length of fabric. (I found the shift instructions on marariley.net. Great site overall for information on period dress!)

First attempt at cutting out the body of the shift
I’ll spare you the bulk of the story, but my first attempt at a shift resulted in a garment that was absolutely HUGE. A fellow seamstress very kindly gave me a piece of linen she’d purchased then found unsuitable for what she’d wanted, so I tried again. Much better—the neckline is still too wide, but I realized the directions are intended for use of a drawstring, which I didn’t plan on doing. (There’s actually less provenance for a drawstring neckline than a plain, flat seam.)

Coming up with a workable cardboard stays mockup was also interesting. Using a JP Ryan pattern for mid-18th century stays, I cut each piece separately, minus seam allowances, the boning lines parallel with the corrugation, then taped them together.

First stays mockup, taped and ready for laces
The first stays mockup--so long! So awkward!
 (See how the tabs stick straight out, especially along the back and sides?)

My second mockup, shift, and petticoat
Wearing them was both easier and harder than I expected. Easier, in that I expected the support aspect but they weren’t as constricting as I was afraid they might be. I could move around easily, although they certainly make you sit up and pay attention to your posture, which was their intended purpose. Harder, in that I experienced some cramping across my hips after wearing them for longer than 20 minutes. I kept reminding myself I only had to be able to wear them for a couple of hours, and that real stays would, by all accounts, be much more comfortable. In search of a better fit, I cut new pieces—shorter this time, and made them front-lacing with a stomacher (a separate, roughly triangular piece for the front), which didn’t work very well. In desperation, I reinforced the front sections, which had buckled a little in the fitting, and made it more closely laced in front, then with lots of tape reinforcement across the tabs to make them lie down, called it mostly good.

Finally, it was time to take the plunge on the gown. Using the JP Ryan pattern for a gown l’anglaise, I first did a bodice mockup in unbleached muslin (right now it doubles as the lining—I might redo it later in linen). The fit was decent enough, so with much fear and trembling, I began cutting on the fabulous lightweight worsted wool suiting I’d found online. It’s described as “maroon” but depending upon the light, it looks cranberry or claret. Regardless, it was wonderful to work with. The bodice went together fairly well ...
Pleating the skirt before attaching

That point is awfully bunchy ...
   ... and then came the skirt, with its yards of hand pleating, and eventually sewing—by machine, because it’s an area that won’t show. I did have to redo a bit of the seam, near the point of the back, since it puckered and bunched the first time.

Once I had the lining mostly in and put together the matching petticoat, I had to try everything on again. I pinned the front with a few long florist’s pins, and my daughter helped me mark a hem. That was just a couple of days before the conference ....
Separate skirt and matching petticoat

The gown wouldn’t really be “finished,” but I did manage to get white linen sleeve flounces put in. At the last minute I decided to go with pinning the front closed, and guess what? It was also easier than I expected to weave the pin in and out, and make it secure. I felt a strange new fellowship with the women of the eighteenth century ...

So, I wore my gown for the ACFW conference and had a fabulous time, but after about three hours, my hips and lower back were in some moderate pain. I sadly exchanged the ensemble for a hot shower and comfy modern clothes. By the time I left the conference, I’d decided to get at least the skeleton of a pair of real stays finished by the time my book launch party rolled around—they couldn’t be any worse than the cardboard mockup—but that’s a tale for another segment!

The lovely Beth Goddard & I at ACFW

(Since I came home from conference to the news of a job offer out of state for my husband, and an impending move, my attending the author signing at the November reenactment is currently in question, but I promise to finish with either a recap of that or a review of what I’ve learned about this particular brand of research! Thank you all so much for your patience.)

Friday, September 27, 2013

Linsey Woolsey - Before Cotton was King -


Since my junior high days I've been fascinated with the idea of growing your own fabric - cotton, wool and flax--probably since Social Studies class introduced me to the term linsey-woolsey.  A few weeks ago I discussed how plain cotton fabric became printed cotton with the use of hand carved blocks and a lot of patient and underpaid artisans.  Today I want to share a bit on what the common folk wore before cotton was an option.

Linum usitatissimum  -- the FLAX plant

In many areas of Europe and the UK, wool was a cash crop for the benefit of the estate owners (they raised sheep). The poor were allowed to use what wool they found  (caught on bushes or fences when sheep had pastured in that area) or what they could afford -- probably wool that was of the least quality. Obviously this wasn't much to make yarns for knitting and weaving, so it was combined with the fiber from the flax plant. 

I enjoy flax as an ornamental  because I like the lovely blue flowers of this ancient plant. It is grown around the globe in areas with loamy soils (rich brown, not rocky) and is harvested for flax seed, linseed oil and the fiber used to make linen. I imagine a majority of Americans have never seen it growing, unless you are near some of the large farms raising it commercially.

Nothing I could describe will explain the process better than this video (created about Canadian Pioneers).  I find it all fascinating and would love to try the whole process myself, first-hand. Looks like a lot of work; certainly no less work than the production, harvesting and work involved in taking wool from sheep to sweater, or cotton from seed to shirt for the thousands of years everything was a non-mechanical process!


Linsey Woolsey fabrics combined the yarns of both wool and flax in what used to be the fabric for the masses! Note-- the soft fibers of flax and golden color is the source for the term 'flaxen'  describing lustrous light blond hair!  Flax has been used for so long that the term linen began to encompass many other fabrics --the 'linens' department in a store is any collection of home accessories such as sheets and towels.  Today's linen clothing is often 'upscale' rather than for the poor and the majority of clothing quality flax is grown in western Europe.

Have you ever seen a garment made from linsey-woolsey?


Thanks for visiting!
Debra

Debra E. Marvin
Dark Tales Brimming with Light
Winner, 2012 Phoenix Rattler, Semi-finalist, 2013 Genesis
www.inkwellinspirations.blogspot.com/

http://colonialquills.blogspot.com/
www.facebook.com/debra.e.marvin

www.debraemarvin.com    and...twittering @DebraEMarvin 

Friday, September 20, 2013

Adventures in Historically Accurate Colonial Costuming

[With a nod to Laura Frantz's post "Dress, Shoes, and Stays - Oh My!"]

So ... I’ve always been a perfectionist. Painfully so, and one of the lessons I’ve had to learn as a mother of many is knowing when to let go of the Quest for the Perfect.

Here is one time when I just couldn’t, quite. :-)

A participant in the 2006 Parker's Ferry event
Several years ago, when I first began research on my Revolutionary War novel, Loyalty’s Cadence, I joined a Yahoo group for researchers and living historians, called 18cWoman (18th Century Woman). That list is no longer in existence, but its replacement, 18cLife, has been fairly active. Over the years, the kindly folk there have answered my story questions on everything from regulations about British campfollowing wives to Colonial Christmas traditions. I’ve also witnessed countless discussions about proper clothing for period reenactments and living history events. These people tend to be meticulous in their research and attention to detail, so when the idea of sewing a “real” eighteenth century outfit occurred to me, I brushed it aside. Again—and again. :-)

Okay, I finally thought, IF my historical ever sells. It would be cool to wear one to booksigning events. Then came my first contract for Defending Truth, and the project lurked in the back of my mind through the months of writing and revising the novella. As a challenge to my sewing skills, it would be as much a creative endeavor as the writing, and it was just as important to me to get the research right.

So, a quick overview of 18c (eighteenth century) women’s wear from the skin outward:

  • Shift: the equivalent of 18c underwear, made of pure linen for its availability and breathability. The quality of the linen was determined by one’s station and wealth. “Chemise” is the French word, more commonly in use in the nineteenth century.


    JP Ryan stays pattern
  • Stays: basically the predecessor of a corset, which again is the French word and not in use until later. Often referred to as a “pair” of stays, referring to the two halves, or “bodies,” which is where the word “bodice” comes from (“a pair of body’s”). In the 18c and before, as much of a support garment as for shaping, like an 18c lumbar belt. In use as early as the 16th century, and worn by babies and children as well as adult females. (That scene in Pirates of the Caribbean, where Elizabeth wears stays for the first time, is inaccurate in so many ways ... )
  • Pockets: a bag or two, sewn to a cloth tape and tied around the waist for access through side slits in the skirts. Often highly embroidered, and NOT worn on the outside to attract marriageable men ... 
  • Petticoat: essentially a skirt, at least one, more often two. These were often linen, quilted cotton, silk, or wool. Working women wouldn’t bother to match the petticoat to their jacket or gown, but dressy gowns often had a matching petticoat. 
  • Gown: an open-fronted garment with sleeves, more or less embellished. Fastened down the front with straight pins (yes! it’s true!), or hooks and eyes. The open skirts are sometimes hiked “a la polonaise.” Made of linen (striped or plain), wool, silk, or a block-printed cotton (see Debra’s recent post about fabrics). In lieu of a gown, women also wore jackets, shortgowns, or bedgowns (for undress/casual wear around the house).
  • Apron: also of linen, pinned and/or tied over everything to catch workaday dirt and grime.
  • Cap: a very fine linen, of varying ruffled styles, but NOT the “gathered circle mobcap” style so often seen in ‘70’s historical dramas.

Summer-weight worsted wool
So, when planning this, I had to consider a few things: time, place, cost. The first event I wanted to wear my gown to was the 2013 ACFW conference, held last weekend. The main event is a Revolutionary War reenactment in early November. More historical accuracy would be appreciated at the latter than the former, so I knew I had leeway with finishing and construction to begin with. Cost was a factor because, well, 100% fiber fabrics are usually not cheap, especially for period-appropriate gown fabrics. When inquiring on 18cLife, I was told that drapery-weight cottons were the thing, not quilting cottons (and I had to be careful of the print); linen, but be careful of stripes; wool, usually a summer-weight worsted suiting, and not a twill weave; or a silk print or brocade. Just the thought of trying to choose overwhelmed me. Then, a particular wool went on sale, only to be out of stock by the time I made a decision, so I was back at square one ....

[to be continued!!!]

Monday, September 9, 2013

Dyeing and Blocking- The history behind Printed Fabrics by Debra E. Marvin




In the 18th Century, among the many fascinating items Europeans began to ‘need’ from the far east were printed fabrics. “Fast Printed” meant the colors were not supposed to run, not the speed of creation. By 1700 English, French, and Dutch craftsmen had figured out how to fix their dyes and create prints with the use of elaborate carved woodblocks, but they were slow to catch imports for their desirability.  
Of course, the labor was backbreaking – cold, dark workrooms with boiling vats of dye. Bleak, monotonous work for very long days. Sadly, few samples of the earliest of prints survive. Cotton took dye best and natural fabrics deteriorate unless kept under the best of situations.
The Madder Plant. Roots were the source of red dye

Most dying centered around two major colors – red and blue and were created by the use of MADDER for red and INDIGO for blue.

THE PROCESS:
It’s incredible to see the intricate details carved on old woodblocks.  Dots worked into the patterns (or not) helped the worker line up the block from spot to spot. A block was colored (think of stamping –rolled on, or pressed onto the dye) and pressed against fabric, then imprinted with a tap from a mallet. The process continued, block by block down the yards and yards of fabric. Consider that in a yard and a half , the process on 45” material would have been done 91 times alone with a 4”  sq. block.  (note-45” wide material is the norm now, not then!)

If you are like me, you love TOILE. Here’s an excellent representation of detail but done in one color.



Imagine the work that went into this fabric!

Amazing printed fabric from 1775-1800
http://www.marquise.de/database/dbout.php?name=hindelopen1.jpg&lang=.

Block printing was not perfect and that’s the charm of it. A discerning seamstress might well pass on fabric that was not lined up properly, or had the occasional smear, but someone would use it.  It’s not surprising that prints were not found on the clothes of servants and the working class in the 18th Century!

CREATING THE WOOD  PATTERN BLOCKS was a time-consuming enterprise, starting with a thick block of wood made from sycamore / planetree or pear wood (primarily  in England). They had to be of quality to resist warping when wet, and were backed with two or three other layers of wood, often pine. Grains ran in opposite directions in each layer to further prevent warping.

The block was sanded completely flat and smooth before accepting the sketched on design which was transferred on.  The design started on paper, as it had to be copied over to other blocks if the design had multiple colors. For each color the area of the design was left and the balance carved away. I understand the process from making printing blocks out of a linoleum type material, but the skill involved to make a multi-colored block amazes me.

At times, small details had to be made in metal and added to the block, as small cuts tend to wear away or chip off. The use of copper added a very intense amount of work in such cases.

The process to print continues with the choice of a good cloth, fast dyes, and steady hands. And patience!

For a multi-color print, the entire bolt of fabric had to be hand printed in one color and allowed to dry. A second, third or fourth color could be added with different blocks for the same pattern and additional stamping and drying time. In some cases, if a color was only used in a small part, it was hand painted on.

For many years in England, import of printed fabric was illegal. People loved it but it took away from the domestic fabric industry—until British craftsmen could compete with Indian craftsmen!  Textiles from India led the market for a long time. India muslin and calico remained in high demand even after British mills were rolling out cotton fabric.

Here are few more ways to create printed cloth:
Mordant Dyeing (chemical fixatives stamped to the cloth which was then put into a pot of dye)
Resist Dyeing (placing a resist material, like a wax, on the fabric where dye was not to attach)
Hand Painting!

Flower designs were popular, and still are. Fabric printing by mid 18th century was done to mimic embroidery.  Later, bolder patterns of twisting stems and lines came along but so did small designs which were much easier and cheaper to produce! Now the working class could wear  simple prints.

The term Calico represents printed cotton and may have originated in America as the general term for cotton prints coming from the port of Calicut, India. Chintz, another popular cotton print (generally with a more polished cotton thread and therefore a shinier fabric) is believed to have come from the Hindi word Chint which meant variegated.

I won’t take for granted the classic look of printed cotton when I consider its not so humble beginnings.
For anyone creating period clothing, it is important to look at what materials were used at the time.

Monday, April 8, 2013

Ladies Hatwear in Early America



In early America a woman thought herself only partially dressed if she left her home without a covering for her head, even if it was only a simple white cap.  But hats were considered more than a fashion accessory; they were functional.

photo by Luigi Crespo
LINEN CAPS and cotton kerchiefs were worn for indoor work, such as cooking and cleaning, but when stepping outside a lady often required greater coverage for sun shade or warmth, depending on the season.  In that case, she might don a QUILTED HOOD.  For shading delicate faces and necks, a wide-brimmed, flat-crowned STRAW HAT was the fashion, although not always practical, as it could be swept away with the slightest of winds.  These crowns were typically so flat, in fact, that some rose only about a half-inch off the brim.  They could be worn with the hat brim straight out; but more often, the brim would be drawn around the face like a bonnet, tied down with ribbon strings and then fastened under the chin or behind the head.

Braiding straw for hats such as these became an occupation of many women and a good means for them to earn, being a task they could pick up along with their usual domestic chores.  Many did a brisk business selling their hats to local stores.  Skilled straw weavers learned different weaving patterns and the art of wielding a handheld splitting tool.  The finest of these types of straw hats were woven from imported Leghorn straw.  Ordinary wheat straw produced a coarser finish, yet it served its purpose just as well. 
 
Straw hats were simply dressed with a band of ribbon around the crown, but experienced milliners might line the under brim with a patterned fabric of cotton or silk.  For a more elaborate style, the hat would be covered entirely in silk so as to disguise the straw and then trimmed with silk or paper flowers and perhaps a delicate bit of netting.   Every season called for new linings, more elaborate trimmings—silk, crepe, feathers and ribbons.

Felt hats in white or black were made similar to those of straw.  The COCKED HAT was a popular 17th century style and was worn mostly for traveling or riding.  It looked much like a man’s tricorn with three sides of its brim turned up toward the crown.  The upturned brim might be trimmed with braid, ribbon or fur and even an elaborate ostrich plume.

Calash
The CALASH originated in England, where the latest hairstyles grew so large they created a demand for bonnets which could cover the head without mussing the coiffure.  Calash bonnets were usually made of green silk stretched over hoops of cane.  The fabric in back of the calash was gathered together and held in place with a button or a bow.  It was drawn up over the head by the pull of a cord, but when the wearer moved indoors, she could push it off to fall back in folds like the hood of a calash or gig carriage.  The calash was introduced by the Duchess of Bradford at around 1765 and it remained in fashion throughout the Revolutionary War until the early 1800s.

Poke Bonnet
The Federal period brought new styles.  The wide-brimmed hats of the 18th century were replaced with close-fitted bonnets, one of the most popular being the POKE BONNET.  Though the style was not entirely new, it came into widespread popularity during this time as being the most engaging of ladies’ hats and boasted a stiff, projecting brim that surrounded the face like a funnel and was tied in a wide bow under the chin with its ribbon straps.

The COAL SCUTTLE BONNET was tied in the same way but had a shorter brim and the hat was shaped like that of a coal scuttle.  TURBANS, adorned with ostrich plumes, pearls and pins, also came into fashion but were not very long-lived.  The BONAPARTE HAT was helmet-shaped and trimmed with a laurel wreath.  At times, it would be worn cocked to one side.

Millinery Shop
These are just some of the more popular hats of early America.  Of course, like in our modern times, new styles developed and changed frequently as many local village milliners copied the fashions of Boston, New York, London and Paris.

Lisa Norato is the multi-published author of Prize of My Heart, an inspirational, seafaring historical from Bethany House, set during the Federal era. A life-long New Englander, Lisa lives in a historic village with homes and churches dating as far back as the eighteenth century.